Zin Mesh Roll Reinforcement Concrete is manufactured from hard drawn steel wire for the construction and pre-cast industries. The main and cross wire of the fabric are welded rigidly together by an auto-electro welding machine at constant spacing.
Welded mesh roll should be stored in stacks and visible. Mesh roll should be stored vertically or horizontally on level ground.
Welded mesh roll should be stacked with sufficient supports so that the welded mesh roll will not move or sag.
Avoid contacting with or beneath carbon steel rebar or other ferrous materials. Should be separated with ferrous material when transporting.
Should be covered with polyethylene sheeting or other appropriate material if the mesh bars are kept outdoors.
Fully recommended on using plastic, stainless steel wire or synthetic straps when strapping every welded mesh roll.
Use synthetic straps when lifting. Avoid using carbon steel lifting device, bare chains and steel bands. If it is inevitable, using something to separate them to avoid the direct contact with ferrous materials.
Sharp edges of welded mesh roll can cause injury. Appropriate cut resistant gloves should be worn during the handling process. Welded mesh roll on the floor can also be a trip hazard.
Responsible personnel should develop sitespecific procedures before pouring the concrete on the mesh.